730W+
TOPCon Bifacial
Solar Panel
N-Type Glass-to-Glass. Engineered for industrial India — cold storage, rice mills, atta chakki, EPC projects, and commercial rooftop solar.
Engineered for Industrial India
Cold Storage • Rice Mills • Atta Chakki • Commercial Solar • EPC Projects
Credence Quasar N
Glass-to-Glass Series
The Quasar N is an advanced 730W N-Type TOPCon glass-to-glass bifacial solar panel engineered for maximum output in real-world Indian conditions. 18 Busbar half-cut cell design, positive power tolerance, and glass-to-glass bifacial construction — purpose-built for industrial and commercial solar installations across India.
Why N-Type TOPCon
Outperforms PERC
The N-Type TOPCon bifacial solar panel architecture delivers measurably better results in every real-world metric relevant to Indian industrial solar projects — higher efficiency, lower degradation, and better performance in heat.
N-Type TOPCon Cell Architecture
Tunnel Oxide Passivated Contact virtually eliminates surface recombination. Higher voltage and current than PERC at identical irradiance — the foundation of 23.5%+ module efficiency.
Bifacial Glass-to-Glass Build
Dual tempered glass captures reflected and diffuse light from the rear surface, adding up to 30% more energy in ground-mounted and elevated installations.
Excellent Weak Light Performance
Generates measurable power in early mornings, overcast conditions, and high dust environments — critical for continuous industrial operations across India.
Better Temperature Coefficient
N-Type cells lose less output per degree rise. In Indian summers with panels at 70°C+, this delivers significantly more daily units versus conventional PERC panels.
PID-Free Guarantee
Potential Induced Degradation causes hidden power loss in large string configurations. Quasar N is PID Resistant by design and certified — protecting 30-year energy yield.
18BB Half-Cut Design
18 busbars reduce resistive losses. Half-cut cells improve shade tolerance — essential for real-world partial shading on industrial rooftops and ground-mounted arrays.
See Quasar N Technology
in Motion
Advanced N-Type TOPCon architecture engineered for high-efficiency industrial solar projects — from installation to full-power generation.
730W Solar Panels Built
for Industrial India
High-watt industrial solar panels reduce panel count by up to 45% versus 400W modules — slashing mounting, cable, and installation costs for the same kWp.
Solar Panels for Cold Storage
Continuous compressor loads of 30–200kW. High-watt solar panels for cold storage reduce panel count, lower roof load, and improve payback for cold chain operators.
Rice Mill Solar Panels
High-load motors running 10–16 hours daily. Large rooftops and bifacial ground mounts with 730W panels generate significantly more energy per string.
Atta Chakki Solar Panels
3HP–15HP flour mill motors powered by atta chakki solar panels with VFD drive. A 5kWp system needs only 7 panels at 730W — practical for small operations.
Industrial Solar Panels India
Factories, warehouses, and manufacturing units. Consistent high-voltage DC output compatible with all major on-grid and hybrid industrial inverters across India.
Agriculture Solar Pump Systems
Solar water pumps for irrigation and bore wells. High-watt panels reduce string count needed to drive VFD-controlled pump motors efficiently across Indian farms.
Commercial Solar Panel 730W
Hotels, malls, warehouses, and office complexes. Commercial solar panels at 730W with BIS compliance for net metering and subsidy approvals.
Designed to Deliver
More, for Longer
Industry-leading degradation and positive power tolerance means your plant generates more units than nameplate capacity — every year, for three decades.
30-Year Power Output Comparison
87.4% Output at Year 30
Only 0.40% annual degradation from Year 2. PERC degrades at 0.45–0.55%/yr — over 30 years this compounds into thousands of lost units per kWp installed.
Positive Power Tolerance (0~+4.99W)
Every Quasar N panel ships at or above rated wattage. This directly increases your project's actual generation versus nameplate capacity — guaranteed.
Lower LCOE & BOS Cost
730W means fewer panels for the same kWp. Fewer mounting structures, MC4 connectors, and cable runs — reducing total installed project cost by 15–20%.
Better Low-Light Generation
TOPCon cells respond earlier at dawn and later at dusk — adding 15–30 minutes of productive generation daily across India's varied climate zones.
Full Module Datasheet
Model CS-QBTXXX-132 · All ratings at STC: 1000 W/m², AM1.5, 25°C cell temperature
| Peak Power (Pmax) | 710W – 730W |
| Open Circuit Voltage (Voc) | ~51.5 V |
| Max Power Voltage (Vmp) | ~43.5 V |
| Short Circuit Current (Isc) | ~17.8 A |
| Max Power Current (Imp) | ~16.8 A |
| Module Efficiency | >23.50% |
| Power Tolerance | 0 ~ +4.99 W |
| Max System Voltage | 1500 V DC |
| Bifaciality Factor | 80 ± 5% |
| Cell Technology | N-Type TOPCon |
| Cell Configuration | 132 Half-Cut (18BB) |
| Construction | Glass-to-Glass Bifacial |
| Front Load Capacity | 5400 Pa |
| Rear Load Capacity | 2400 Pa |
| Product Warranty | 12 Years |
| Linear Power Warranty | 30 Years |
| Year 1 Degradation | ≤ 1% |
| Annual Degradation Y2–30 | ≤ 0.40% |
| Pmax Temp. Coefficient | -0.30%/°C |
| Voc Temp. Coefficient | -0.25%/°C |
| Isc Temp. Coefficient | +0.05%/°C |
| NOCT | 45 ± 2°C |
| Operating Temperature | -40°C to +85°C |
| Safety Standards | IEC 61215, IEC 61730 |
| US Standard | UL 61730 |
| India BIS | Certified ✓ |
| Low Light / Energy | IEC 61853-1, -2 |
| Hail / Dust / Salt | IEC 62782, 60068-2-68*, 61701* |
| Quality Management | ISO Certified |
| 3rd Party Testing | TÜVRheinland |
| CE Mark | Yes ✓ |
Every Advantage.
Zero Compromise.
Higher Generation Per Panel
A 100kWp system needs ~137 panels at 730W instead of 250+ at 400W — cutting mounting, cable, and labor costs significantly for every project.
More kWh per ₹Better Performance in Indian Heat
N-Type's lower temperature coefficient retains more output at 70°C+ panel temperatures. More generation in peak Indian summer conditions when loads are highest.
Superior Heat PerformanceLower Total Project Cost
Higher wattage reduces BOS cost — fewer mounting structures, connectors, and cable runs. Total installed cost per kWp drops by 15–20% versus standard panels.
Lower BOS CostIndustrial-Grade Build Quality
5400 Pa front mechanical strength, glass-to-glass construction, and 12-year product warranty — built to survive monsoons, hailstorms, and extreme temperature cycles.
Industrial DurabilityLower Long-Term Degradation
0.40%/year versus 0.55% for PERC. Guaranteed 87.4% output at Year 30 improves project IRR and lifetime energy yield across all EPC and rooftop projects.
30-Year PerformanceSubsidy & Approval Ready
BIS-certified for PM Surya Ghar and DISCOM net metering. IEC, UL, TÜV certifications satisfy EPC and institutional financing requirements across India.
BIS · IEC · TÜVCommon Questions Answered
TOPCon (Tunnel Oxide Passivated Contact) is an advanced N-Type solar cell technology that adds a thin tunnel oxide layer between the silicon wafer and the rear contact, virtually eliminating surface recombination. This enables efficiencies exceeding 23.5% and delivers lower degradation, better low-light performance, and improved temperature coefficient versus conventional PERC panels.
Bifacial solar panels generate electricity from both front and rear surfaces. The rear side captures reflected and diffuse light, adding 10–30% more energy generation depending on installation type. For industrial projects with large ground-mounted or elevated arrays, bifacial panels significantly improve overall energy yield and reduce the Levelized Cost of Energy (LCOE) of the solar plant.
High-watt N-Type TOPCon bifacial panels like the Credence Quasar N 730W are the best solar panels for cold storage. They reduce panel count by up to 45%, lowering roof load and mounting cost. Better temperature coefficient ensures less output loss in summer when cooling demand peaks. Explore Cold Storage Solar →
730W solar panels are ideal for: cold storage solar systems, rice mill solar, atta chakki and flour mill solar, agricultural pump systems, industrial motor VFD solar drives, commercial rooftop solar (hotels, warehouses, factories), and large EPC/utility-scale projects. High wattage reduces panel count, mounting structures, and overall Balance of System (BOS) costs by 15–20%.
Glass-to-glass solar panels use tempered glass on both front and rear surfaces instead of a conventional backsheet. Benefits include: better mechanical rigidity (5400 Pa load resistance), improved moisture resistance, longer module life (30+ years), bifacial capability for rear-side power generation, better performance in coastal and high-humidity environments, and enhanced resistance to PID.
Yes. Credence Quasar N 730W TOPCon bifacial solar panels are BIS certified, making them eligible for government solar subsidies, PM Surya Ghar scheme, DISCOM net metering, and ALMM-compliant projects. They also hold IEC 61215, IEC 61730, UL 61730, CE, ISO, and TÜVRheinland certifications.
The Credence Quasar N offers 12-year product warranty and 30-year linear power warranty, guaranteeing at least 87.4% output at Year 30. First-year degradation is capped at 1%, annual degradation from Year 2 is guaranteed at just 0.40% — among the best in the industry for N-Type TOPCon modules.
The Credence Quasar N 730W is ideal for atta chakki solar. At 730W per panel, a 5kWp system needs only 7 panels — making rooftop solar highly practical even for smaller chakki operations. Paired with a solar VFD drive, it can directly power 3HP–15HP flour mill motors. Explore Atta Chakki Solar →
Build Your Next Industrial
Solar Project
Talk to our technical team for bulk pricing, project sizing, and delivery schedules for 730W TOPCon bifacial solar panels across India.
For over 20 years, we have been a trusted provider of Solar System/Services in India. Our expert team delivers sustainable and affordable solutions customized to your needs, earning us a reputation for excellence in the industry. Let us help you harness the power of solar energy today for a greener tomorrow.